X2 Copy MT4 | X2 Copy MT5 | X2 Copy MT4/5 Trial (free testing)
Copy | Add | Filters | Symbols
Fastened lot Measurement — When this setting is enabled, this system will copy all trades from the supply account to the receiving account utilizing a strictly mounted lot dimension specified within the discipline. This overrides all different quantity calculation guidelines (together with multipliers, balance-based calculations, and per-symbol settings).
Multiplier — Units a quantity multiplication coefficient for all copied trades. The unique lot is multiplied by the required worth (e.g., 2.00 for doubling). Works along side different quantity administration settings.
Auto Multiplier by (Stability/Fairness/Margin Issue) — A perform for mechanically calculating the quantity multiplier primarily based on the present monetary state of the accounts. As a substitute of a hard and fast coefficient, this system dynamically calculates the multiplier by evaluating the chosen parameter (Stability, Fairness, or Free Margin) of the SLAVE account to the MASTER account.
• When “Stability” is chosen — multiplier = SLAVE Stability / MASTER Stability.
• When “Fairness” is chosen — multiplier = SLAVE Fairness / MASTER Fairness.
• When “Margin Issue” is chosen — multiplier = SLAVE Free Margin / MASTER Free Margin.
Instance: if the MASTER account stability is $1000 and the SLAVE account stability is $2500, the coefficient will probably be 2.5. A commerce with a 0.10 lot will probably be copied as a 0.25 lot. This enables automated danger scaling relying on the capital dimension of every account.
Copy Purchase Opening — Permits copying the opening of market purchase (BUY) trades.
Copy Purchase Closing — Permits copying the closing of market purchase (BUY) trades.
Copy Promote Opening — Permits copying the opening of market promote (SELL) trades.
Copy Promote Closing — Permits copying the closing of market promote (SELL) trades.
Copy Purchase Restrict — Permits copying Purchase Restrict pending orders.
Copy Promote Restrict — Permits copying Promote Restrict pending orders.
Copy Purchase Cease — Permits copying Purchase Cease pending orders.
Copy Promote Cease — Permits copying Promote Cease pending orders.
Copy Cease Loss (Absolute/Relative) — Determines the strategy for copying the Cease Loss degree from the unique commerce. In “Absolute” mode, the extent is copied as a precise value worth; in “Relative” mode, as a distance in factors from the opening value.
Copy Take Revenue (Absolute/Relative) — Determines the strategy for copying the Take Revenue degree from the unique commerce. In “Absolute” mode, the extent is copied as a precise value worth; in “Relative” mode, as a distance in factors from the opening value.
Copy | Add | Filters | Symbols
Retry on Error (sec) — If an execution error happens on the dealer’s aspect, this system will mechanically retry the request after the required variety of seconds. This enables dealing with non permanent community or server failures with out handbook intervention.
Max Execution Slippage (factors) — The utmost allowable slippage the dealer can apply when executing copied orders. It units an higher restrict for the deviation of the execution value from the requested value. If the dealer’s proposed value exceeds this restrict, the order won’t be executed and an error will probably be returned. Measured in factors.
Copy Value Distinction (factors) — The copy value distinction, mechanically tailored for Purchase/Promote trades: (0 = copy on the similar value or higher), (+N = required value enchancment), (-N = allowable value worsening). Instance: +30 for a Purchase = opening 30 factors beneath the MASTER’s value.
Reopen Closed Trades — Permits mechanically reopening trades on the SLAVE account in the event that they had been closed (manually or in any other case) whereas the corresponding trades on the MASTER account are nonetheless lively.
Regulate Small Volumes to Min. Lot — If the calculated commerce quantity is lower than the dealer’s minimal allowed lot, it is going to be mechanically elevated to the minimal worth. The commerce will probably be copied with the adjusted quantity.
Regulate Massive Volumes to Max. Lot — If the calculated commerce quantity exceeds the dealer’s most allowed lot, it is going to be mechanically diminished to the utmost worth. The commerce will probably be copied with the adjusted quantity.
Reverse Copy — Inverts all commerce and order varieties throughout copying: market BUY trades grow to be SELL and vice versa, TP/SL ranges are swapped, and pending orders are remodeled (BUY LIMIT ↔ SELL STOP), (SELL LIMIT ↔ BUY STOP).
Copy | Add | Filters | Symbols
Embrace Magic — A parameter for filtering trades by their distinctive identifier (Magic Quantity). Specify comma-separated Magic Quantity values of the trades on the MASTER account that needs to be copied to the SLAVE. Solely trades with the required identifiers will probably be copied. Instance: “333, 555, 777” — this system will copy solely trades with these three Magic Numbers.
Exclude Magic — A parameter for excluding trades from copying by their distinctive identifier (Magic Quantity). Specify comma-separated Magic Quantity values of the trades on the MASTER account that ought to NOT be copied to the SLAVE. This filter has the best precedence — trades with the required Magic Numbers won’t be copied, even when they’re current within the Embrace Magic checklist. Instance: “0, 9999” — this system won’t copy handbook trades (Magic=0) and trades with Magic=9999.
Embrace Remark — A parameter for filtering trades by the precise remark textual content. Specify full remark texts separated by commas. This system will copy to the SLAVE account solely these trades from the MASTER account whose remark precisely matches one of many specified values. To repeat trades with an empty remark, add an empty worth to the checklist. Instance: “EA_Signal,,Handbook Commerce” — solely trades with the feedback: (EA_Signal), (), (Handbook Commerce) will probably be copied.
Exclude Remark — A parameter for excluding trades from copying by the precise remark textual content. Specify full remark texts separated by commas. Trades from the MASTER account whose remark precisely matches one in every of these values will NOT be copied to the SLAVE. This filter has the best precedence. To exclude trades with an empty remark, add an empty worth to the checklist. Instance: “take a look at,correction,” — trades with the feedback (take a look at), (correction) or with an empty remark won’t be copied.
Commerce Kind for Counters — Defines which trades take part within the counting for the commerce limitation guidelines beneath. The (Skip First [N] Trades) and (Max [N] Trades) limits apply solely to the chosen commerce sort.
• Trades = Market Offers + Pending Orders: All trades (each market offers and pending orders) are counted and filtered.
• Trades = Market Offers: Solely market offers are counted for the bounds. Pending orders are ignored by the counters and filter.
• Trades = Pending Orders: Solely pending orders are counted for the bounds. Market offers are ignored by the counters and filter.
Skip First [N] Trades / Account — A everlasting rule to disregard the primary N trades on all the MASTER account. This system will NEVER copy the primary N trades (taking into consideration the “Commerce Kind for Counters” setting), however will begin copying from the commerce quantity N+1 and all subsequent ones. Instance: a worth of 5 signifies that the primary 5 trades on the account will probably be ignored, and copying will begin from the sixth commerce.
Skip First [N] Trades / Image — A everlasting rule to disregard the primary N trades for every image (forex pair). For every image, this system skips its first N trades and begins copying solely from the commerce quantity N+1 for that image. Instance: a worth of three — the primary 3 trades for every image will probably be ignored, and copying will begin from the 4th commerce.
Max [N] Trades / Account — The utmost variety of concurrently open trades allowed on all the SLAVE account. Copying of latest trades from MASTER will probably be suspended as quickly as the overall variety of open trades (of the sort chosen in “Commerce Kind for Counters”) on SLAVE reaches the required worth N. Copying will resume after some trades are closed and their rely falls beneath the restrict.
Max [N] Trades / Image — The utmost variety of concurrently open trades allowed for every particular person image (forex pair) on the SLAVE account. Every image has its personal impartial restrict. Copying of a brand new commerce for an emblem will probably be blocked if the variety of already open trades for this image on SLAVE is the same as or exceeds N. Instance: with N=2, you possibly can have not more than 2 open trades per image concurrently.
Copy | Add | Filters | Symbols
Symbols Mapping — Tab for configuring the correspondence of symbols (forex pairs/devices) between MASTER and SLAVE accounts.
Grasp Image (Left Desk) — Record of all symbols on which there are or have been trades on the MASTER account. The checkbox to the left of every image lets you briefly disable copying of trades particularly for this image.
Slave Image (Proper Desk) — Record of symbols on the SLAVE account to which trades will probably be copied. Reverse every MASTER image, you possibly can specify the corresponding SLAVE image.
Logic of Operation:
• Auto-Matching: On first launch, this system mechanically searches for symbols on the SLAVE account with precisely the identical title (ignoring suffixes and prefixes) and full buying and selling permission.
• Handbook Configuration (Double-Click on): If copying to a special instrument is required (e.g., MASTER: “BITCOIN” → SLAVE: “BTCUSD”), double-click the cell in the appropriate column and enter the specified SLAVE image title. After enter (urgent Enter or clicking elsewhere), this system will confirm the existence of this image with the SLAVE dealer.
• Verification End result: If the image is discovered — the mapping is saved. If not — a purple “Not Discovered” label will seem, and the mapping won’t be used.
Reset Symbols and Fill Robotically — Resets all handbook mappings and makes an attempt to mechanically match SLAVE symbols by title once more, following the auto-matching rule.
